Item: IDAH PM53F pellet die, IDAH PM635D pellet mill die, IDAH PM53F pelleting die, IDAH 635D feed pellet machine die, IDAH pellet machine matrix, IDAH PM53F pellet die set, IDAH pellet ring die
1. Pellet Die Introduction
1.1 Material of the pellet die: X46Cr13 /4Cr13(stainless steel), 20MnCr5/20CrMnTi (alloy steel) or customized
1.2 Hardness of ring die: 52-60 HRC
1.3 Diameter of pellet die can do: 1.0mm up to 28mm
1.4 Pellet die type: Ring Die, Flat Die
1.5 Compressing ratio of ring die: 1:4-1:30, as per needs.
2. Pellet Die Compressing Ratio Reference
Buyers can customize pellet die according to their own situation and requirement.
Here below is the compresssing ratio & hole diamter for reference only:
Poultry & livestock feed pellet ring die: Hole diameter 2.5-4.5mm Compression ratio 1:4.5-1:13
Fish & shrimp feed pellet ring die: Hole diameter 1.0-2.5mm Compression ratio 1:16-1:28
Biomass & wood pellet ring die: Hole diameter 6.0-12.0mm Compression ratio 1:4-1:8
3.Pellet Die Supply Scope
We can produce any type pellet die for different brands pellet mill which including but not limited to:
Muyang (Famsun), Andritz, IDAH, CPM, Buhler, CPP, OGM, Zhengchang(ZCME), Kahl, Yulong(XGJ), AWILA, PTN, Matador, Paladin, Sogem, Van Arssen, Yemmak, Promil...etc.
For IDAH pellet mill: IDAH PM42SA, IDAH PM53SC, IDAH PM53F, IDAH PM635D.
4.Tips
How to maintain and inspect the pellet die?
1.The rollers should be correctly adjusted, make sure the hole inlets are not damaged by contact with the rollers or as a result of tramp metal;
2.Material should be evenly distributed across the whole working area;
3.Make sure that all holes work uniformly, opening the clogged holes if necessary;
4.When changing dies, carefully inspect the condition of the die seating surfaces and fixing systems including collar, clamp or wear ring.
