Item: Buhler pellet die, BUHLER pellet mill die, BUHLER pelleting die, BUHLER feed pellet machine die, BUHLER pellet machine matrix, BUHLER pellet die set, BUHLER AHHC520/178 pellet ring die, Biomass wood pellet die
1. Pellet Die Introduction
1.1 Material of the pellet die: X46Cr13 /4Cr13(stainless steel), 20MnCr5/20CrMnTi (alloy steel) or customized
1.2 Hardness of ring die: 52-60 HRC
1.3 Diameter of pellet die can do: 1.0mm up to 28mm
1.4 Pellet die type: Ring Die, Flat Die
1.5 Compressing ratio of ring die: 1:4-1:30, as per needs.
2. Pellet Die Compressing Ratio Reference
Buyers can customize pellet die according to their own situation and requirement.
Here below is the compresssing ratio & hole diamter for reference only:
Poultry & livestock feed pellet ring die: Hole diameter 2.5-4.5mm Compression ratio 1:4.5-1:13
Fish & shrimp feed pellet ring die: Hole diameter 1.0-2.5mm Compression ratio 1:16-1:28
Biomass & wood pellet ring die: Hole diameter 6.0-12.0mm Compression ratio 1:4-1:8
3.Pellet Die Supply Scope
We can produce any type pellet die for different brands pellet mill which including but not limited to:
Muyang (Famsun), Andritz, CPM, Buhler, CPP, OGM, Zhengchang(ZCME), Kahl, Yulong(XGJ), AWILA, PTN, Matador, Paladin, Sogem, Van Arssen, Yemmak, Promil...etc.
For Buhler pellet mill: Buhler350, Buhler400, Buhler420, Buhler AHHC520/178, Buhler AHHC530/192, Buhler660, etc.
4.Tips
How to maintain and inspect the pellet die?
1.The rollers should be correctly adjusted, make sure the hole inlets are not damaged by contact with the rollers or as a result of tramp metal;
2.Material should be evenly distributed across the whole working area;
3.Make sure that all holes work uniformly, opening the clogged holes if necessary;
4.When changing dies, carefully inspect the condition of the die seating surfaces and fixing systems including collar, clamp or wear ring.
